Flex Thermometer MT1931

CE Class IIa medical device.
Mercury-free thermometer that measures in 60 seconds.
With a flexible probe, memory of the last measurement.
Waterproof with an audible signal.

Important precautionary measures
- The thermometer is intended exclusively for measuring body temperature.
- The thermometer correctly finishes measuring body temperature only when an acoustic signal is given by the <>.
- The thermometer contains small components (batteries, etc.) that can be swallowed by children. Never leave the thermometer within reach of children.
- Protect the thermometer from impacts.
- Avoid bending the probe beyond 45°.
- Avoid ambient temperatures above 60 °C: do not boil the thermometer.
- Use only the disinfectants listed in the <> section to clean the thermometer. The thermometer must be intact when immersed in the disinfectant liquid.

Instructions for use
Switching on the thermometer:
To switch on the thermometer, press the button next to the display; a short beep indicates that the thermometer is on. A display test is automatically performed.
All icons should appear on the display.
When the ambient temperature is less than 32 °C, an <> (Low – temperature too low to be detected) will appear on the display and a flashing <<°C>> will appear in the upper right. The thermometer is now ready for use.
Instructions for use:
Choose your preferred measurement method.
During measurement, the temperature is continuously displayed, and the <<°C>> symbol flashes.
When the temperature increase is less than 0.1 °C every 16 seconds, the audible signal (beep-beep-beep-beep 10 times) will indicate that temperature measurement is complete, the <<°C>> symbol will stop flashing, and the thermometer will be ready to read body temperature.
To prolong battery life, turn off the thermometer after use by briefly pressing the power on/off button.
The thermometer will automatically turn off after about 10 minutes.
Recording measured values:
If you press and hold the button for more than three seconds when switching on the thermometer, the temperature recorded during the last measurement will automatically appear on the display and a small <> will indicate that the reading is a stored data.
After 3 seconds this value will disappear, and the thermometer will return to normal measurement mode.
The recorded value is deleted.

Code. MT1931