Description
The device is a portable micronized nasal douche for aerosol therapy. The device consists of a base unit containing a pneumatic micro-compressor and a rechargeable battery. On the upper part there is a medicine tray with its nebulizing bell. It operates on a rechargeable battery, and the charging status is indicated by 3 LED lights. Operation causes the liquid contained in the tray to be nebulized through an atomizer into the nasal cavities. Excess liquid and nasal secretions are collected in a space between the two bells. The device is a micronized nasal douche for aerosol therapy that allows the treatment of upper respiratory tract conditions and the physiological (with saline, hypertonic solution or thermal water) and/or therapeutic (with medication) washing of the nasal cavities. The device produces a jet of micronized solution which, directed into the nasal cavities, promotes hydration, fluidification and removal of mucus and catarrh.

Composition
Base unit: ABS shell, NBR rubber and silicone with an electric micromotor and a polymer lithium battery (WEEE) inside.
Upper part:
-Medicine tray: polycarbonate PC;
-Atomizer: polycarbonate PC;
-Outer bell: polycarbonate + silicone;
-O-ring gasket: silicone.

Technical specifications
-Power supply: internal Lithium Polymer battery 3.7 V 1.650 mAh
-Power adapter: input 100-240 V, 50/60 Hz, 0.5 A; output 5 V DC 2 A
-Minimum filling volume: 3 ml
-Maximum filling volume: 15 ml
-Max pressure at compressor: 1 bar
-Max flow at compressor: 5 lpm
-Weight: 260 g
-Dimensions: 210x60x100 mm
-Noise level: 58 dbA
-MMAD: 49 micron
-Appliance useful life: 400 hours.

Instructions for use
Warning: liquid penetration into the handpiece will result in damage to electrical components and safety hazards for the user. Before proceeding with the operations indicated below, disassemble the accessories from the handpiece; to perform these operations, ensure that the power cable is not connected to the device's USB port.
Base unit:
-Cleaning: cannot be cleaned under water. Use a soft damp cloth; a non-abrasive neutral detergent can be used.
-Disinfection: Use a sponge or soft cloth moistened with a cold disinfectant solution (e.g., a solution with a sodium hypochlorite concentration not exceeding 2%), following the manufacturer's instructions. Verify that the solution is compatible with the material the base unit is made of.
-Sterilization: the sterilization cycle is not provided.
Upper part components:
-Cleaning: can be washed with hot water (approx. 40°C) using detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. Once all parts have been cleaned, they can be dried with a soft cloth and stored.
-Disinfection: after being washed, they can be immersed in a cold disinfectant solution (e.g., a solution with a sodium hypochlorite concentration not exceeding 2%), following the manufacturer's instructions. Accessories can be disinfected by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pot.
-Sterilization: they are compatible with the autoclave sterilization cycle at 121°C for at least 15 min. (max 30 min.) for a maximum of 20 cycles.

Storage
-Temperature: -20°C-+60°C.
-Relative humidity: <85%.
-Atmospheric pressure: 700-1,060 hPa.

Format
Pack containing 1 Rinowash Ego.

Code. 418000