Description
The device is an infrared thermometer designed to measure forehead temperature in infants and adults without the need for contact with the human body.
It can be used by consumers in a domestic environment, as well as by doctors in clinics.
The thermometer is powered by two AA batteries (DC 3V).
LCD display and infrared lens.

The thermometer is preset to BODY mode. Surface temperature differs from body temperature. To obtain body temperature, always use BODY mode. When measuring the temperature of a baby bottle or a tub, use Surface Temp mode. To measure room temperature, use Room mode.

Technical Specifications
- Memory: 32 measurements.
- Measurement distance: 3 cm - 5 cm.
- Automatic shutdown in less than 30 seconds.
- Display temperature: 0.1°C (0.1°F).
- Measurement range:
Body temperature measurement: 32°C - 49°C (89.6°F - 109.2°F).
In BODY mode, the screen has three backlight colors: green, orange and red.
Green: below 37.3°C (99.1°F), normal temperature.
Orange: 37.4°C - 37.9°C (99.3°F - 100.2°F), low fever.
Red: above 38°C (100.4°F), high fever.
Surface temperature measurement: 0°C - 60°C (32°F - 140°F).
Ambient temperature measurement: 0°C - 40°C (32°F - 104°F).
The thermometer can detect temperature values below 32°C or above 42.9°C, but accuracy is not guaranteed outside this range.
- Accuracy:
32°C - 34.9°C (89.6°F - 94.8°F): ±0.3°C (±0.6°F).
35°C - 42°C (95°F - 107.6°F): ±0.2°C (±0.4°F).
42.1°C - 42.9°C (107.8°F - 109.2°F): ±0.3°C (±0.6°F).

Instructions for use
Install the batteries. For first use after inserting the batteries, wait 10-15 minutes for the device to adapt to room temperature. Press the On/Scan button, pointing it at the center of the forehead, at a distance of 3-5 cm. Make sure it is set to BODY mode, then press the On/Scan button and the temperature will be immediately displayed. Before taking a measurement, make sure that hair, sweat or dirt are removed from the forehead and that the forehead is thoroughly dry. Wait 10 minutes after performing such an operation before taking the measurement.

Normal use conditions:
Ambient temperature 10°C - 40°C (50°F - 104°F).
Relative humidity less than 85%.
Altitude pressure 700 hPa to 1060 hPa.

Measurement reliability is not guaranteed if temperature measurement is performed on another body part (e.g., arm, torso).
Do not move the thermometer until the final value is displayed.
Measurements cannot be taken in places with a large airflow (e.g., wind, air conditioning, fans).
Do not take a measurement immediately after physical activity, showering, taking medication, eating or drinking, or applying a cold or warm compress to the forehead. Do not take a measurement when there has been a significant change in environmental conditions. Allow the device to adapt to the new conditions for 30 minutes before using it again.
Wait 3 to 5 seconds between measurements.
It is recommended to take three measurements on the forehead. If the three measurements are different, consider the highest value.

Clean the sensor with a cotton cloth, moistened with 95% isopropyl alcohol. Cleaning should be done regularly. To clean the entire device, use a soft cloth slightly moistened with warm soapy water or 70% isopropyl alcohol. Under no circumstances should liquid enter the thermometer.
Do not use the thermometer for at least 30 minutes until it is completely dry.
Never use aggressive detergents, thinners, gasoline or hard brushes.

Warnings
Use the thermometer only after reading and understanding the instructions for use. Use only for the specific purpose as described in the instruction manual. Any improper use will void the warranty.
The use of the thermometer cannot replace consultation with a doctor. Do not use the device for self-diagnosis or taking medication based on measurements taken without medical advice. In particular, do not start using medication or change the type of dosage without prior approval.
Children should not use this thermometer. The device is not a toy.
If this thermometer is stored in a place colder or warmer than the place where it will be used, leave it in the patient's room for at least 30 minutes before taking the measurement.
Do not expose the thermometer to electric shocks and extreme temperatures above 55°C (131°F) or below -20°C (-4°F). Do not use the device in case of relative humidity greater than 85%. Do not expose the thermometer to sunlight, excessively high or low temperatures, dirt or dust.
Do not drop the thermometer.
Do not touch the infrared lens glass with your fingers. The lens is very fragile and could easily break and cause injury.
Do not use if the thermometer is damaged.
Do not open the thermometer: it contains small parts that can be swallowed by children.
Do not immerse the thermometer in water or other liquids. It is not water-resistant or waterproof.
In case of problems with the device's operation, do not attempt to repair it yourself, as this would void the warranty. Contact your retailer and have repairs performed only by authorized service partners.
Remove the batteries if you do not intend to use them for an extended period. Otherwise, there is a risk that the batteries may be damaged.
Keep the thermometer away from electromagnetic fields produced by devices such as microwave ovens, soldering irons, induction devices.
A control measurement with a conventional thermometer is recommended in the following cases:
- if the reading is surprisingly low;
- for infants up to 100 days old;
- for children under three years old with a weak immune system or who react unusually with or without fever.
- if you are using the thermometer for the first time or want to familiarize yourself with it.

Storage
Store at a temperature between -20°C and +55°C, in a clean and dry environment, away from sunlight or excessively high or low temperatures.
Validity with intact packaging: 60 months.

Format
Package containing:
- Non-contact infrared thermometer;
- User manual.

Code JXB-178